Component - Plastics

File Number: E121855

FORMEX, DIV OF ILLINOIS TOOL WORKS INC

425 N Gary Ave

Formex GL-(a)(d)(f2)(i)

Polypropylene (PP)

UL Certification Logo
-- (a) One to three digit suffix indicating nominal thickness in mils.
-- (d) May have additional suffix letter(s) indicating color.
-- (f2) Subjected to one or more of the following tests: Ultraviolet Light, Water Exposure or Immersion in accordance with UL 746C, where the acceptability for outdoor use is to be determined by UL.
-- (i) IPT rating is 60 min at 1.5 kV for thicknesses less than 0.43mm in the color BK
-- NOTE HVTR, CTI and D495 are not dependent on thickness
Create your free Prospector account to view this complete UL Yellow Card. A free account includes access to thousands of detailed Yellow Cards. Create Your Free Account
Flammability
Nominal Value
Unit
Test Method
Flame Rating
     
0.015 in, NC, BK
 
UL 94, IEC 60695-11-10, -20
0.017 in, NC, BK
 
UL 94, IEC 60695-11-10, -20
0.028 in, NC, BK
 
UL 94, IEC 60695-11-10, -20
0.0043 to 0.0098 in, NC, BK
 
UL 94, ISO 9773
Electrical
Nominal Value
Unit
Test Method
Hot-wire Ignition (HWI)
    UL 746A
0.0043 to 0.0098 in
 
 
0.015 in
 
 
0.017 in
 
 
0.028 in
 
 
High Amp Arc Ignition (HAI)
    UL 746A
0.0043 to 0.0098 in
 
 
0.015 in
 
 
0.017 in
 
 
0.028 in
 
 
Comparative Tracking Index (CTI)
 
UL 746A
Dielectric Strength
V/mil
ASTM D149
High Voltage Arc Tracking Rate (HVTR)
 
UL 746A
Inclined-Plane Tracking
kV
ASTM D2303
Volume Resistivity
ohms·cm
ASTM D257, IEC 60093
Arc Resistance
 
ASTM D495
Thermal
Nominal Value
Unit
Test Method
RTI Elec
    UL 746B
0.0043 to 0.0098 in
°F
 
0.015 in
°F
 
0.017 in
°F
 
0.028 in
°F
 
RTI Str
    UL 746B
0.0043 to 0.0098 in
°F
 
0.015 in
°F
 
0.017 in
°F
 
0.028 in
°F
 
Physical
Nominal Value
Unit
Test Method
Outdoor Suitability
 
UL 746C
UL LLC ©2024. All rights reserved.
The information presented here was acquired by UL from the producer of the product or material or original information provider. However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third party sites is not within our control, and we cannot and will not take responsibility for the information or content.